 |
Begin by making chunks. Since we're talking square chunks, I used a flat, rectangular mold. You might want to spray the mold with Crisco, or a light coating of petroleum jelly. Heat your soap and color as desired, then pour into the mold (I poured mine about 1/2 inch deep). A quick spritz with alcohol will deter bubbles. |
||
 |
I usually let it cool for 10 minutes, and the pop in the fridge for another 15-20 (or longer). |
||
 |
After the soap is solid, remove from mold. If it doesn't come out with some gentle help, put it back in the fridge for a little while longer. |
||
 |
Cut the soap into chunks of desired size. I made squares and some long rectangles. You can get creative here and use some cookie cutters, or cut some fancy triangles, but I kept it pretty plain. I have a cutting board I use specifically for soaps; remember soap is slippery - be careful when cutting!! |
||
 |
Arrange chunks into mold of choice. I put the squares in haphazardly, and then lined the rectangles in the mold. |
||
  |
Time for the overpour. Some people squirt their chunks with alcohol just before the overpour. I haven't noticed a significant difference, try it both ways and see what you find. However, I recommend letting your chunks cool a bit before doing the overpour. If they are too cold, they will sweat. For the squares, I scented the overpour, but no color, and used a clear base. With the rectangles, I scented and colored an opaque base. |
||
 |
After pouring, you should do some tapping to release air bubbles, but not enough to jostle all your chunks - especially if you have them places a particular way. After tapping, spritz with the alcohol to kill the bubbles. Do the whole wait 10 minutes, then move to fridge thing until they are solid (see step 2). | ||
 |
Remove soaps from the mold. Cut them however you please. Enjoy!! | ||
 |
| ||
All images and content
Copyright © 2003-4 Soap & Candle Stand